Alloy Filter Logo

FILTALLOY

TECHNOLOGY LTD.

Metal Filter Elements & Materials

Sintered Multi Layer Wire Mesh Laminated

Sintered multi-layer wire mesh laminated equipment

Share This Post

Content

1What is Sintered Multi Layer Wire Mesh Laminated?

2. Sintered Multi Layer Wire Mesh Laminated Structure

3.How is Sintered Multi Layer Wire Mesh Laminated Produced?

(1) Check Each Layer Wire Mesh

(2) Point Weld the Several Layers Together

(3) Sintered Multi Layer Wire Mesh Laminated Process

4.Advantages of Sintered Multi Layer Wire Mesh Laminated

(1) High Pressure Resistance

(2) Filter Accuracy Uniformly

5. Application of Sintered Multi Layer Wire Mesh Laminated

 

 

 

 

1. What is Sintered Multi-Layer Wire Mesh Laminated?

Sintered multi-layer wire mesh laminated is multi-layers of woven wire mesh overlapped together and sintered in the vacuum furnace after high temperature and high-pressure process. It has higher strength and better overall steel. The filter aperture is uniform. The sintered multi layer wire mesh laminated overcomes the disadvantages of layer on less strength, poor rigidity and unstable aperture single. The advantages of this filter is reasonable filter rating, penetration and strength. It’s used for situations of high requirement on filter accuracy, high-pressure drop, abrasion resistance, heat resistance, cold resistance and processing.  The industry includes petrochemical, nuclear, synthetic fiber, pharmaceutical, food, astronal and so on.

 

2. Sintered Multi-Layer Wire Mesh Laminated Structure

The commonly used sintered multi-layer wire mesh laminated is a 5 -layer structure with a thickness of 1.7mm, and the minimum filtering accuracy can reach 1um. It consists of a protective layer, filter layer, separation layer, and two layers of support layer.

Others can also be customized, such as 3 layers, 7th, 10th floor, etc. Filtering accuracy and each layer of structure can be customized according to customer requirements. If you don’t know the details, you can consult us. We have experienced technical personnel to provide you with technical consulting services.

 

3. How is Sintered Multi-Layer Wire Mesh Laminated Produced?

(1) Check Each Layer Wire Mesh

Before sintering the multilayer wire mesh laminated, we check each layer wire mesh. Confirm the material, mesh and wire. And check whether the mesh surface is smooth. If there’s damage, we’ll replace the new one.

(2)  Point Weld the Several Layers Together

We then point weld the several layers together to make them at the place duirng high pressure sintering processsintered multi-layer wire mesh laminated process

(3)  Sintered Multi-Layer Wire Mesh Laminated Process

Multi-layer wire mesh laminated are sintered in the vacuum sintering oven. We introduced the advanced sintered oven from Germany. It could make the material is heated uniformly. And we have skilled technicians to control the sintered temperature and sintered time. This is the most important technique to assure the sintered quality.

The usual sintered multi-layer wire mesh laminated size 800x800cm, 800x1000cm, maximum size 1500x1500mm. Large size requires high equipment, and few enterprises can achieve it. We have introduced the special equipment to meet your demand. Larger size has a higher demand on technicians. You could get the ideal products from our factory. If you have special sizes, please contact us.

 

4. Advantages of Sintered Multi-Layer Wire Mesh Laminated

(1) High Pressure Resistance

The sintered multi-layer wire mesh laminated is constructed by several layers of stainless steel wire mesh, with the sintered process. The thickness is several times higher than the single-layer stainless steel wire mesh. So it is very good to resist high pressure.

Some customers may say that they can also use several layers of mesh which are crimped at the top and bottom. Under lower pressure, it could work. But with higher pressure, the middle place will be bubble defect. This will easily cause equipment failure and affect work efficiency. So for this situation,  we suggest sintered multi-layer wire mesh laminated.

(2) Filter Accuracy Uniformly

The multi-layer metal sintering mesh is made of a few layers of stainless steel nets in the vacuum sintering oven. Each part is sintered under the same pressure. When filtering, the same-size particles pass.

 

5. Application of Sintered Multi-Layer Wire Mesh Laminated

Sintered multi-layer wire mesh laminated is widely used in the fields of liquid filtration, gas filtration, pharmaceutical, powder separation and other fields. It is especially suitable for occasions with strict environmental requirements and small filtration particle sizes.

 

We have rich experience in sintered multi layer wire mesh laminated production and usually cooperate with the Top 500 companies in the world. If you have any harsh filter problems, our technical team will discuss them and give you the best solution.

 

 

 

 

 

 

More To Explore

Metallic Filter Cartridges

1. What is Metallic Filter Cartridge?  2. What’s the Advantage of Metallic Filter Cartridge? 3. How to Choose the Metallic Filter Cartridge? 4. How to Maintain the Metallic Filter

QUESTIONS? MESSAGE US NOW!